Hardware & Tools

Bambu Teases Mixed Nozzle and Filament Sizes on H3C 3D Printer

Katrin VerhoevenNovember 1, 20265 min read2 views

At a glance

  • Bambu's latest H3C teaser suggests a single job could combine 0.2 mm and 0.4 mm nozzles with 1.75 mm and 2.85 mm filaments, but support and software details remain unconfirmed.
  • Bambu’s latest H3C teaser depicts a watch built with 0.4 mm and 0.2 mm nozzles plus 1.75 mm and 2.85 mm filaments, pointing to mixed-nozzle, multi-material printing. It is still unclear whether the capability will reach existing printers or be limited to new models.
A conceptual multi-nozzle 3D printer builds a watch-like assembly with rigid, detailed, and flexible sections beside spools of different filament diameters.

Bambu is continuing a piecemeal tease of its H3C 3D printer, shifting attention from multi-color output to the use of multiple nozzles and filament diameters in a single print. The company’s latest promotional image shows a multi-component watch composed of parts produced with different nozzle and material combinations.

According to the teaser, the rigid case is shown with a 0.4 mm nozzle and 1.75 mm filament; the crisp details with a 0.2 mm nozzle and 1.75 mm filament; and the soft strap with a 0.4 mm nozzle and 2.85 mm filament. The strap material is described only tentatively as TPU, so the image should be read as a suggestion of capability rather than a confirmed material specification.

What the teaser implies

Two implications stand out. First, Bambu appears to be adding compatibility with 2.85 mm filament for soft, rubbery materials such as TPU. Second, and more significantly, the image suggests that 0.2 mm and 0.4 mm nozzles could be used within the same print. That would address a long-standing request from users of Bambu’s H2D and H2C printers, and likely the more recent X2D as well.

The distinction matters because Bambu’s current dual-nozzle workflow does not allow users to mix 0.4 mm and 0.2 mm nozzles in one job; users can select only a single nozzle. The new teaser implies that multiple nozzle and filament sizes could be combined in a print, presumably when producing multiple objects. Software limitations are described as the obstacle on current dual-nozzle systems.

Open questions for the H3C and P3C

It is not yet clear whether mixed nozzle sizes would be available across all compatible Bambu printers or limited to the upcoming flagship H3C and P3C. The open question is whether Bambu intends to drive sales of new machines or extend new features to existing customers—features those customers arguably should already have been able to unlock.

The smaller P3C has not been formally announced, with only the H3C teased so far. Even so, there is no obvious reason why the P3C would not offer the same multi-nozzle and filament-size compatibility.

Bambu later added a teaser video showing watch components being printed in place as a single part with multiple nozzle and filament sizes. That update reinforces the direction of the promotion, but it remains a promotional demonstration. Key details—supported combinations, slicer workflow, hardware requirements, availability, and whether existing printers will receive the capability—have not been disclosed.

For now, the feature should be treated as a preview rather than a shipped specification. Its practical value will depend on how slicing software assigns nozzles and filament types across a job, and on whether those assignments can be used routinely without adding complexity to the print setup.

Reported by Katrin Verhoeven, Materials and Durability Editor.