Industrial Machinery

Fives HPM Positions RoboTDM Robotic Machining Between Conventional Robots and Large CNC Tools

Ines FarkasOctober 29, 20265 min read3 views

At a glance

  • The Liné Machines RoboTDM targets large parts needing tolerances near 0.1 mm, with Fives reporting cycle time cuts of up to 70% in trimming and milling.
  • Fives High Precision Machines has detailed the Liné Machines RoboTDM, a robot-based system for milling, trimming and drilling large workpieces where tolerances of about 0.1 mm suffice. Fives reports deviation reductions to 100 μm and cycle time savings of up to 70%, while acknowledging that tighter tolerances still call for a high-precision CNC machine.
An industrial robot arm with a spindle end effector mills a large curved panel in a factory bay, with modular workstation frames in the background.

Fives High Precision Machines (Fives HPM) is offering a robotic machining system as an alternative to large CNC machine tools for components that do not need the tightest tolerances. The Liné Machines RoboTDM, part of the company's Material Removal business line, performs milling, trimming and drilling directly on large workpieces using an industrial robot fitted with a specialized end effector.

The system targets applications where tolerances down to about 0.1 mm are acceptable. In that range, Fives argues, investing in a large CNC machine can mean paying for capability the job does not require, along with the associated footprint and setup burden. RoboTDM instead brings the machining capability to the workpiece rather than bringing the workpiece into a large machine envelope.

Process range

The end effector combines a spindle, toolholder and cutter so that material can be removed directly from the part. Fives lists potential operations including face milling and deburring of castings, trimming excess weld beads, drilling pilot holes on large aerospace panels or automotive body parts, and trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.

Closing the accuracy gap

Conventional industrial robots have typically achieved positional tolerances of around 0.3 mm, which Fives says is insufficient for many machining tasks. The RoboTDM development work concentrated on closing that gap through high-precision robotic machining. Robot calibration techniques, combined with advanced look-ahead and motion-planning algorithms, allow programs containing more than one million points to be processed without the latency that can otherwise distort robot motion, producing smoother trajectory execution for multi-axis contouring.

Fives says the system can reduce machining deviation to as little as 100 μm, or 0.1 mm, described as a threefold improvement over conventional robotic accuracy. Trials spanning several years, run as an internal R&D project, demonstrated cycle time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings.

Configuration and scope

The machining end effector can be specified with different spindle sizes, power ratings, torque and speed. Available systems provide spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. Options include automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling work. The same platform can be configured for waterjet cutting, laser profiling and ultrasonic cutting.

RoboTDM can be set up with multiple workstations and customized peripheral equipment, and its relatively modest foundation requirements are intended to simplify installation compared with a large CNC machine tool. Fives sees particular potential in aerospace, defense, maritime and energy, where components can be very large and production requirements vary considerably.

The company is explicit about the boundary: where tolerances tighter than 0.1 mm are necessary, a high-precision CNC machine remains the appropriate choice, and RoboTDM is presented as complementary to the wider Fives HPM machine tool portfolio. Fives Liné Machines Inc, now part of Fives HPM, has been active in North America for almost 50 years from its facility in Granby, Quebec, Canada, which produces Liné CNC machine tools and robotic solutions including RoboTDM, and supports engineering, integration, automation, service and training across equipment lifecycles.

Reported by Ines Farkas, Tool Quality and Sourcing Analyst.