Industrial Machinery

KraussMaffei Extrusion Introduces Single-Stage PVC InlineMixing Process for Roofing Membranes

Maren OstergaardNovember 17, 20265 min read0 views

At a glance

  • The continuous process combines metering, plasticizing and forming in one line, aiming to cut energy use, floor space and labor compared with conventional two-stage dry-blend production.
  • KraussMaffei Extrusion has developed a continuous single-stage process that feeds PVC components directly into a twin-screw extruder, eliminating a separate hot-cold mixing step. The company reports energy savings of up to 75 percent depending on conditions, along with lower capital and operating costs in an industrial reference line.
Concept illustration of a continuous extrusion line in which metered PVC components feed directly into a twin-screw extruder and emerge as roofing membrane through calender rollers.

KraussMaffei Extrusion has developed a single-stage extrusion process for producing PVC roofing membranes, an approach it says can reduce energy consumption and shorten production time compared with the conventional two-stage route. The company presented the PVC InlineMixing process from its Laatzen site, describing it as a continuous alternative to batch-based dry-blend preparation.

In the traditional method, PVC powder, plasticizers, additives and fillers are first combined batchwise in a separate hot-cold mixer to create a dryblend. After cooling and intermediate storage, the compound is plasticized in a twin-screw extruder and formed into membrane. The new process removes the separate mixing stage: all solid and liquid components are metered directly into the extruder through gravimetric dosing systems.

Cost and energy profile

According to KraussMaffei, eliminating the standalone heating-cooling-mixing combination removes the need to invest in that equipment and means the material is heated only once. Depending on the formulation, system parameters and location, the company states that energy consumption and energy costs can fall by up to 75 percent.

The manufacturer also points to lower space requirements, reduced labor costs and lower maintenance spending, since wear parts for the hot-cold mixer are no longer required. Together with lower capital expenditure and operating costs, these factors are presented as improving overall cost-effectiveness and supporting a faster return on investment.

Flexibility in operation

KraussMaffei says the continuous setup allows formulation adjustments and color changes to be carried out directly during operation through the integrated control system, avoiding the preparation and interim storage of separate dryblend batches. Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, described the benefit for membrane producers as a competitive advantage built on lower production costs, greater flexibility and more efficient manufacturing, with the ability to adjust formulations during production while reducing energy and capital expenditure.

Development and validation

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and tested with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, fitted with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65, and the combination of high torque and large free volume is intended to provide a wide process window for different formulations.

KraussMaffei reports that testing confirmed good gelation levels of the PVC and high product quality, with the mechanical properties and weldability of the membranes meeting industrial requirements across several formulations. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial membrane production, adding that customers can test their own formulations under production-relevant conditions at the Technology Center.

Industrial use

The process is already running on an industrial production line for PVC roofing membranes. The reference plant reaches a total throughput of 1,800 kg/h using two extruders and two calenders, with PVC, additives, fillers and the resulting edge trimmings processed continuously into finished membrane. KraussMaffei frames the development as a way to combine high product quality with a leaner production process.

Reported by Maren Ostergaard, Earthmoving Equipment Analyst.